Mounting Holes:

1.   Using template or actual Quick Mount (or Luggage Bracket),    
mark holes with an awl or punch.
2.   Drill the Spacer Plate holes --a 1/4" drill should work for most
bolts.
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
About MCR
Quick Mount & Luggage Bracket SPACER PLATE


Cutting the Spacer:

1.    Use bolts to check alignment with the Quick
Mount or Bracket and make sure the cutting outline
is correct, i.e., at least equal to the external
dimensions of the Mount or Bracket.
2.    Use whatever cutting device works best with
your spacer material (sabre saw, coping saw, etc.)
and cut the outline.
3.   Prepare the spacer for mounting --sand, fill, paint.


Mounting the Spacer:

1.    Using longer bolts, mount the spacer between the luggage and the Quick Mount or Luggage Bracket.


















2.    Check to assure that the luggage clears the shock absorber (*see red arrow in photo).
Function: to provide clearance when mounting straight luggage that hangs
down over the shock absorber.